Products

30 L Vacuum Oven

  • Double wall construction with stainless steel rectangular working chamber.
  • Self compensating door seal with silicone rubber gasket.
  • Exterior finished in scratch resistant baked enamel.
  • Walls insulated with fibreglass.
  • Observation window 300 x 300 mm wide made of tempered glass 13 mm thick allows a full view of the oven working space.
  • Choice of single perforated aluminium shelf located centrally or two shelves spaced 100 mm apart.
  • Elements are mounted on an aluminium surround against the outer walls of the stainless steel working chamber.
  • Two needle valves with insulated handles for vacuum and bleed use are mounted on the control panel with a vacuum gauge to –100 kPa.
  • Operating controls and a pilot light are located beneath the oven door.
  • Temperature is controlled by a thermostat.
  • Choice of analogue or digital solid state control for finer temperature differential and easier temperature setting can be fitted if required.
  • All solid state control ovens fitted with overtemp cutout thermostat.
  • 300°C units available.

Temperature Control

Thermostat

Analogue Solid State

Digital Solid State

Catalogue No.

VAC30

VAC30A

VAC30D

Temperature Range

35 to 200°C

Ambient to 200°C

Ambient to 200°C

Temperature Sensitivity

Approximately 2°C

1°C

0.5°C

Number of Shelves

1 or 2

1 or 2

1 or 2

Internal Size HxWxD

300x300x350 mm

300x300x350 mm

300x300x350 mm

External Size HxWxD

540x460x480 mm

540x460x480 mm

540x460x480 mm

Working Volume

30L

30L

30L

Power Rating

1250W

1250W

1250W


Dynavac Engineering 30 L Vacuum Oven, Two needle valves with insulated handles for vacuum and bleed use are mounted on the control panel with a vacuum gauge to –100 kPa, Choice of analogue or digital solid state control for finer temperature differential and easier temperature setting can be fitted if required.
Copyright © 2004 Dynavac Engineering Pty Ltd. All rights reserved.

to top of page